pvc, pe foam and thermal insulation , foam for shoe sole, FOAM FOR FLOOR MAT
ABS- flame retardant and impact modifier.
PVC-impact modifier and processing aid.
TPO and PP impact modifier and processing aid, flow ability for PE film,
modifier for PE, impact modifier nylon
PVC window profiles, pipe, fittings , siding, vinly blind, PIPE JOINT,
WINDOW GASKET/ SEAL, BEARING PAD RESILIENT MOUNT,
blending with pe, and pvc for recycle plastics.
PVC impact modifier, CHLORINATED POLYETHYLENE ( CPE ) can replace or blend at any ratios with other impact modifier
like ACR based impact modifier or MBS based impact modifier, by adding CPE improve cold temperature on ACR based
impact modifier and improve weatherbility on MBS based impact modifier
Adding CPE in rigid PVC profile can accept higher filler to further reduce production cost.
In flexible PVC ,CPE can be used as permanent plasticiser
CPE has characteristics which are good for use on low voltage flexible cables (such as HPN cord) at lower cost than
neoprene or hypalon. CPE is cold, oil and heat resistant, as well as flame retardant. In the case of HPN cord CPE acts as
insulation and jacket combined.
Chlorinated polyethylene (CPE) modifier for PVC window profile or other PVC rigid profiles can be used alone or blending
at any ratios with Acrylic based or methacrylate-butadiene-styrene MBS based impact modifier - PVC Window profile , adding
CPE can improved weatherability on MBS based impact modifiers and further enhance cold temperature resistance on
Acrylic based impact modifier.CPE/ACR or CPE/MBS blend at 50 /50 ratio.
Our cm422 used as migration free plasticized films, profiles, roofing membrane, auto sector such as flexible PVC sheet.
CPE352 modification of polyethylene and polypropylene to in prove flame retardancy, mechanical property and resistance
ageing, weather for cables with superior electrical property
CM422 blending with PVC are also widely applied. CPE as permanent high molecular-plasticizer for PVC could successfully
avoid migration effect by common plasticizers.
CPE is superior in abrasion resistance and has long flexing life and is widely used in production of soles